A&N Corporation High Vacuum Components

Can-Vac Technologies is a representative of A&N Corporation, a manufacturer of high vacuum components since 1965 offering researchers and laboratories an extensive line of standard high and ultra high vacuum components, as well as custom valves and process chambers. A&N products are designed to meet or exceed the standards required by industrial and academic users, such as those involved with thin film deposition, surface analysis, laser devices, cryogenics and the aerospace industry.

ASA/ANSI (150) Flanges & Fittings

A&N’s ASA/ANSI flanges and fittings are manufactured for compatibility with 150 lbs. ASA flanges and 150 ANSI flanges. The ASA/ANSI flange specification was originally created for use with steam pipes. Now adapted for vacuum use the system utilizes an elastomer seal and is capable of achieving high vacuum pressure levels.

ASA/ANSI flanges provide a complete range of fittings to mount with tubing sized from 1 inch up to 12 inches in diameter. The flange system consists of two flanges, a sealing ring and bolt fasteners to compress the seal between the two flanges. A pair of ASA/ANSI flanges must have one grooved flange to accept the sealing ring and one smooth face flange onto which the seal will be made. To ease system assembly rotatable flanges are available for bolt hole alignment.

[gview file="http://www.canvactech.ca/pdfs/asaansiflangesandfittings.pdf" force="1"]