canvactech.ca » Hybrid Adapters http://canvactech.ca/wp Vacuum pump sales and service Mon, 30 May 2011 15:02:37 +0000 en hourly 1 http://wordpress.org/?v=3.2.1 A&N Corporation High Vacuum Components http://canvactech.ca/wp/archives/355 http://canvactech.ca/wp/archives/355#comments Wed, 04 May 2011 21:14:44 +0000 Hollis http://canvactech.ca/wp/?p=355 Can-Vac Technologies is a representative of A&N Corporation, a manufacturer of high vacuum components since 1965 offering researchers and laboratories an extensive line of standard high and ultra high vacuum components, as well as custom valves and process chambers. A&N products are designed to meet or exceed the standards required by industrial and academic users, such as those involved with thin film deposition, surface analysis, laser devices, cryogenics and the aerospace industry.

]]> http://canvactech.ca/wp/archives/355/feed 0 Hybrid Adapters http://canvactech.ca/wp/archives/332 http://canvactech.ca/wp/archives/332#comments Wed, 04 May 2011 19:44:47 +0000 Hollis http://canvactech.ca/wp/?p=332 A&N hybrid adapter fittings allow vacuum users to connect two dissimilar vacuum flanges or a vacuum flange to a fitting used in conjunction with vacuum process (Swagelok®,VCR®, NPT). To minimize the effect this transition fitting has on conductance, hybrid adapters are designed with the shortest length and with the largest inner diameter possible.

Please note that hybrid adapters are not used to change sizes within one flange family. Fittings used to connect two differently sized flanges from within the same vacuum flange family are called reducer fittings. These fittings can be found in the catalog section for that specific flange family.

[gview file="http://www.canvactech.ca/pdfs/hybridadapters.pdf" force="1"]

]]> http://canvactech.ca/wp/archives/332/feed 0